2027 Sure-Trac Power Tilt Deckover ST-DOT10222-150 | Elite 15K Hauler

Price: $13,275.00

2027 Sure-Trac Power Tilt Deckover ST-DOT10222-150 | Elite 15K Hauler

SKU: 94321

Description

The Sure-Trac Power Tilt deckover trailer (Model ST-DOT10222-150) represents a premium commercial-grade open flatbed engineering solution designed to eliminate the manual strain of traditional loading configurations. Combining an extra-wide 8.5′ x 22′ fully tilting platform with a robust 15,000 lb gross vehicle weight rating (GVWR), this severe-duty unit provides an exceptional 10,515 lb payload capacity. By positioning the premium treated pine timber deck entirely over the wheel assemblies, this layout completely eliminates structural side rail blockages, allowing logistics operators, heavy contractors, and agricultural transport teams to load wide equipment or multi-tier pallets directly from the side with a forklift. When you invest in a professional Sure-Trac Power Tilt asset, you add a high-efficiency transport system to your commercial workforce.

Why Choose a Sure-Trac Power Tilt Deckover Platform?

The primary mechanical advantage of this specific Sure-Trac Power Tilt build is its hydraulic loading engineering. Operating via an advanced power-up and power-down hydraulic scissor mechanism, the entire 22-foot deck smoothly inclines to a shallow, gradual entry angle at the push of an electronic button. This completely removes the necessity of handling heavy, independent manual ramps, making it much safer to load low-clearance machinery like industrial rollers, scissor lifts, and commercial zero-turn mowers. The premium hydraulic pump and deep-cycle battery assembly are housed within a secure, integrated bulkhead storage enclosure, which comes pre-equipped with an on-board 110-volt battery charger to keep the lifting network operating seamlessly on remote job sites.
Premium Hardware Specifications
    • Massive I-Beam Infrastructure: Forged on a heavy-duty 10-inch, 12 lb/ft I-beam main frame matched to an identical I-beam structural tongue to handle high vertical stress points without bowing.
    • Tandem Slipper Spring Axles: Outfitted with dual 7,000 lb premium easy-lube suspension axles featuring integrated self-adjusting electric brakes for stable, predictable highway tracking.
    • Industrial Cargo Tiedown Suite: Packed with versatile structural load management points including a full-length outer rub rail, integrated steel stake pockets, chain spools, and six recessed 5/8″ D-rings.
    • Commercial Radial Wheel Assemblies: Rides on heavy-duty ST235/80R16 Load Range E 10-ply radial tires mounted to high-strength 16-inch 8-lug steel wheels for heat resistance under severe loads.

Industrial Build Quality of the Sure-Trac Power Tilt Frame

Every square inch of this rugged Sure-Trac Power Tilt model is fabricated to withstand abusive field environments. The flooring structure features 3-inch structural channel crossmembers arranged on tight intervals, topped with 2-inch pressure-treated pine decking and capped with steel tread plate guards directly over the wheels for maximum localized protection. The entire chassis is finished in an industrial-grade polymer powder coat process that undergoes a multi-stage mechanical blast preparation, establishing a resilient outer shell that actively fends off chipping, rust, and weather degradation. A heavy-duty tube steel front bulkhead stands tall at the front of the bed to prevent cargo from shifting into your truck bed during sudden braking.

Operational Balance for Your Sure-Trac Power Tilt System

Safely managing a heavy-capacity Sure-Trac Power Tilt trailer demands precise load calculation and proper towing alignment. When driving heavy tracking machinery onto the 22-foot deck, ensuring that roughly 60% of the total equipment weight rests forward of the tandem slipper springs is standard safety protocol. Proper positioning generates stable downward tongue weight on your tow vehicle’s adjustable pintle or 2-5/16″ ball coupler, preventing dangerous high-speed swaying or fishtailing. Dual 12,000 lb drop-leg set-back tongue jacks provide absolute uncoupled support, preventing the hitch tongue from sinking into soft ground when unhooked at a job site.

Essential Maintenance for Your Sure-Trac Power Tilt Unit

While a Sure-Trac Power Tilt trailer is built for maximum uptime, maintaining a routine maintenance schedule preserves your investment and maximizes its ultimate resale value.
    • Hydraulic Pump Fluid Care: Regularly inspect the reservoir levels inside the tongue storage box and keep the 110V charging harness connected during long winter storage cycles to maintain battery integrity.
    • Slipper Suspension Lubrication: Periodically check the equalizer bolts and grease the Easy Lube hub fittings on your 7K axles to minimize metal friction wear.
    • Tire and Lighting Inspections: Maintain proper PSI within the 10-ply radial tires and check the EverLink high-performance wiring harness connections before any long-distance haul.

To cross-verify that your heavy machinery transport configuration conforms to modern cargo security standards, review the safety regulations listed on the NATM Website. If you are looking to cross-shop this power tilt deckover platform against larger gooseneck configurations or dump trailer setups across our active inventory lot, feel free to browse our full catalog of trailers for sale right here on our digital showroom.

Features

  • 10″ Structural I-Beam Main Frame
  • 10″ I-Beam Tongue Configuration
  • 3″ Structural Channel Cross Members at 16″ oc
  • Adjustable 2-5/16 Coupler
  • Safety Chains
  • 7-Way RV-Style Molded Plug
  • Breakaway Switch with Battery
  • EverLink Wiring Harness
  • Sealed Brake Connections
  • Dual Setback 12K Drop Leg Jacks
  • Power Tilt Hydraulic Deck
  • Hydraulic Scissor Hoist System
  • Slipper Spring Axles
  • Brakes on Both Axles
  • Easy Lube Hubs
  • 16″ Radial Tires
  • Steel Wheels
  • Wheel Assembly, 235/80R16
  • Powder Coat Finish
  • Pressure Treated 2″ Decking
  • (6) 5/8″ D-Rings
  • Stake Pockets and Rub Rail
  • Integrated Chain Spools
  • All LED Lights
  • Limited 3-Year Warranty

Video

 

Contact Old South Trailers for more information.
Email us at: info@oldsouthtrailers.com or start a chat to purchase this trailer. 

Things to know….
- Unlike many other dealers, Old South does not add-on any additional Dealer Fees (i.e. Doc, Admin, Prep, Inbound Delivery Fees, etc.)!
- Advertised prices are cash or check
- Credit / Debit cards are accepted with an additional 3% handling fee
- Financing is available with approved credit (An additional documentation fee applies when using our lenders)
- Prices do not include any applicable Sales Tax, License or Titling Fees
- Images may display optional items
- Pricing and Specifications may change without notice
- Measurements and dimensions are approximate

PLEASE NOTE: While we strive to update our website daily - our inventory does change rapidly. Please contact us to confirm specific trailer details and availability.

Additional information